Scan to
physical model.
CT / MRIIt starts with your scan. DICOM files, anonymised on your side before they reach us.
SegmentationThe airway and the lobes are separated from the scan, slice by slice, and checked against it.
Digital modelThe geometry is built for your test: wall thickness, openings, connectors and mounts.
Print prepOrientation and supports are set so the thin branches come out clean and open.
Print & finishPrinted in clear resin, cured and finished by hand in our studio.
Have a scan,
or just a question?
Who provides anatomical phantoms for medical device V&V in Israel?
Tal m3Dical is an Israel-based medical design studio producing anatomical phantoms and validation models for medical device companies. Work covers R&D benchtop testing, V&V protocols, and investor demonstrations. Output ships globally.
Where can I get custom silicone anatomical models for R&D testing?
Tal m3Dical produces custom silicone anatomical replicas cast from 00-15 Shore (extremely soft, tissue-equivalent) to 50A Shore. Molds come from 3D-printed masters derived from your CT or MRI data. Anti-friction coating is available for vascular and luminal phantoms.
What is the best way to convert CT scans to 3D anatomical models for validation?
The key differentiator is whether the person doing segmentation also specifies the fabrication. Here, the same medical designer segments the CT data, determines wall thicknesses, selects the fabrication approach, and builds the model, with no translation loss between digital and physical. Turnaround is typically days to two weeks depending on complexity.
Who makes transparent anatomical models for device demonstrations?
Tal m3Dical produces transparent anatomical models in clear SLA resin. After post-processing the part is clear and see-through, so internal details and colored structures stay visible through the outer wall. It is transparent, not optical-grade clear. Used for investor pitches, trade show demos, and device visualization.
Are the models regulated medical devices?
They are built as research and engineering tools for medical device R&D, V&V, and demonstration. Tal m3Dical is a design studio, not a regulated device manufacturer, so the models support development work rather than clinical decision-making. Most clients bring a development need and the right deliverable is defined together on a short scoping call.
What do you need from me to start a project?
Usually CT or MRI data in DICOM format and a short description of what you are testing or demonstrating. If you do not have a scan yet, that is fine, the anatomy and intended use can be discussed first. Most projects begin with a 20-minute call that resolves scope and the right deliverable.
How fast can you deliver an anatomical model?
Typically days to about two weeks, depending on complexity, material, and finishing. Because one person handles segmentation, design, and fabrication, there is no procurement chain or subcontractor handoff to slow things down. Rush timelines can often be accommodated, ask when scoping.
Which parts of the body can you model from a scan?
Effectively any region that can be reconstructed from CT or MRI, including cardiac, neurovascular, pulmonary, skeletal, spinal, pelvic, and abdominal anatomy. Soft-tissue, vascular, and bony structures can be separated and color-differentiated by tissue type. It is not limited to scan data, anything beyond CT or MRI can be modeled to spec from reference images, drawings, physical samples, measurements, or your design intent.
Do you make cardiac and vascular models?
Yes, built custom for your project. Hearts, heart valves, coronary arteries, the aorta, and peripheral and neurovascular vessels are segmented from CT or MRI. Vessels can be built hollow, as open lumens, for catheter navigation and flow testing, in soft silicone or clear SLA resin.
Do you make gynecological and pelvic models, such as uterus, cervix, vagina, or pelvic floor?
Yes, built custom for your project. Uterus, cervix, vaginal canal, and pelvic floor anatomy can be modeled for gynecological, obstetric, and women's health device testing. Pelvic soft tissue is usually segmented from MRI, and soft silicone gives a tissue-like feel for insertion and fit testing.
Do you make airway and lung models?
Yes, built custom for your project. The trachea, bronchial tree, lung lobes, and nasal and sinus passages are segmented from CT. Airways can be printed or cast hollow for scope, catheter, and stent testing.
Do you make brain, skull, and neurovascular models?
Yes, built custom for your project. Brain, skull, and cerebral vessel anatomy is modeled from CT or MRI, with structures separated and color-differentiated for surgical planning, training, and device demonstration.
Do you make orthopedic and spine models?
Yes, built custom for your project. Bones, joints, vertebrae, and the pelvis are segmented from CT, where bone reconstructs with high detail. Used for implant fit, instrument testing, and surgical training.
Do you make dental and maxillofacial models?
Yes, built custom for your project. Jaws, teeth, and facial bones are modeled from CT or CBCT data for implant planning, guide design, and device development.
Do you make abdominal and urological models, such as liver, kidneys, or bladder?
Yes, built custom for your project. Liver, kidneys, bladder, prostate, and the gastrointestinal tract are segmented from CT or MRI, including internal vessels and ducts where the scan shows them.
My anatomy is not listed. Can you still make it?
Most likely yes. Anything that appears in a CT or MRI scan can be segmented and built. Without a scan, the model can be built to spec from reference anatomy, images, drawings, physical samples, or measurements. Describe what you are testing and the right approach is defined together.
Is my data and project kept confidential?
Yes. Pre-commercial device work requires it. Patient data and project details are handled confidentially and an NDA is available on request before anything is shared. Nothing leaves the studio without your authorization.
Can I review the model before it is manufactured?
Yes. During the project you get access to a private online 3D viewer where you can rotate, inspect, and comment on the model in your browser, no software to install. You sign off and approve the manufacturing order before anything is built, so there are no surprises.
Who can see my models in the 3D viewer?
Only your team. Each project has its own login, models are never public, and nothing is shared without your authorization.
Start a
model.
Send the scan, or just the question. We scope it on a call first.
FOR RESEARCH, TRAINING, PLANNING, DEVELOPMENT AND V&V ONLY. NOT FOR CLINICAL USE IN HUMANS.